Galaxy S7 edge Wireless Charging Battery Pack Case

http://ift.tt/1TOU4Y8

Anyone ordering this? a combined 7000 mAh sounds amazing... The specs say it will charge the s7 edge 1/2 way so it's like having an s7 edge with 5400 mah instead of the 3600mah.
Too bad the battery case doesn't charge wirelessly also. That'd be cool.




I searched the model # and found a few sites selling for under retail, but the sites authenticity seems sketchy.

For example,

$66 here http://ift.tt/1TOU4Ya
or
$72 here http://ift.tt/1TOU4Ye

from xda-developers http://ift.tt/1oMDHOL
via IFTTT

Have I bricked my phone?

When I boot it shows me the failed to boot screen and it tells me to either reboot or to go into recovery mode which is another white screen that doesn't help. I can however access the recovery settings menu thing. I can apply an update from sdcard, wipe data/factory reset (which I tried and just rebooted the phone) or wipe cache partition. I am on 10-B133SP04. I read other guides and it says I should try upgrading to b602, but all of the download links are dead. What do?

from xda-developers http://ift.tt/1TOU1eT
via IFTTT

USB Host and full charging at same time. v2

Our device is already quite old, but as a navigator or a video monitor in the car, he is able to perform its wonderful functions.
I wanted to make it work in the USB-Host mode and simultaneously charge current of 1-1.5 A. I tried different schemes, firmware, kernel.
That scheme, which allows the USB-Host and full charge at the same time.
Simple version:

Complicated:

I used a reed relay type 2A and 1C.
After power on, 3pin and 4pin Samsung 30pin connector via resistors 33kOhm and 10kOhm are closed on the + 5V and the Gnd, the tablet starts full charging.
Push the button, self-locking relay K1, as well as closes 13pin through 20 kOhm resistor to the 15pin. Relays K2 and K3 switch 3pin and 4pin Samsung connector to 3pin and 2pin USB.
If the power is turned off relays K1, K2 and K3 are opened and the next occurrence of the power tab becomes full charge mode.
Capacitor C1 0,03F will delay the opening of the switch for 3-4 seconds, and allow time to safely remove the USB drive (Tasker: power on, usb drive on <- script / run shell / command: service call mount 7 s16 /mnt/sdcard/extStorages/UsbDriveA).

Attached Thumbnails

   

from xda-developers http://ift.tt/1oMDDhZ
via IFTTT

Porting Rom

Guys..., I have a mt6582 device running stock 3.4.67 kernel it has older kernel 3.4.5 but not higher can I port 3.10.x kernel to my device or make for it.
If it possible then how to?:confused:

from xda-developers http://ift.tt/1TOTTvX
via IFTTT

my mobile is dead completely

my nokia x mobile is completely not working while installing the new rom what i have to do.it didn't shows even the nokia logo also... please help me fast...pls...

from xda-developers http://ift.tt/1oMDBXf
via IFTTT

Help to install DOLBY on Stock plz

here's an zip of DOLBY http://ift.tt/1oMDxXw

its works with all custom rom, but not working with any stock rom of falcon.
can anyone plz help me to enjoy DOLBY on stock rom plz...

TIA

from xda-developers http://ift.tt/1TOTQjO
via IFTTT

Correct uninstall

Hi all, installed release_Remix_OS_for_PC_64_B2016030106 on my 64GB usb pen, in resident mode. Now I was in need to uninstall it, so I rebooted my pc in windows and formatted the usb drive.

But now I have only 1 partition with a 23,9 Size and looking in disk management, this is what I have (image attached). What is driving me mad is that if I click on the non-allocated partition, I can't do nothing, just property is not greyed out.

Need some help on this...

Attached Thumbnails

 

from xda-developers http://ift.tt/1oMDv23
via IFTTT